Quantcast
Channel: SCN : All Content - SAP CRM: Webclient UI - Framework
Viewing all 4552 articles
Browse latest View live

Radhakrishna

$
0
0

hai gurus I am not getting group links as per customization..

 

 

 

                                                                                                                                 In Above web ui screen I Customized own Navigation bar profile, Logical links, Groplinks, I got proper out put after assing to particular Business role but not got a Group links. I got standard group links such as Create, search instead of my own group links.


I am expecting effective answer from Gurus


Configurable buttons in CRM WebClient UI

$
0
0

I heard that buttons can now be made configurable, too, i.e. they can be shown/hidden (maybe also enabled/disabled) depending on the technical role key, component usage, object and sub object type, just like fields or column on the UI. Does someone know more about this? Is this available with CRM 7.0 EhP 1 or only with EhP 2? Does someone know where I can find more information about this, how to do the configuration? (I know that not all buttons from existing views and viewsets have been enabled to be configurable by SAP.)

 

I tried to find something in http://wiki.sdn.sap.com/wiki/display/CRM/CRM+Web+Client+UI+Framework but I only find examples for how to hide buttons via code, not via configuration.

Integrate a BW-BPS layout with CRM Planning - missing planning profile selection

$
0
0

Hi,

 

I’m trying to integrate a BW-BPS layout with CRM Planning.

 

I followed the instructions from the paper “Integration of BPS layouts with CRM Planning.”

http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0641069-9f1c-2e10-70ae-d131e7af9f10?overridelayout=true&50457276051841

 

Unfortunately, on the CRM side, I don’t see any BW-BPS planning profiles when I press F4 in the “Planning Profile” field found in the Transaction Types area (page 11).

 

Several BW-BPS planning profiles exist on the BW side. I have confirmed that the BW and CRM systems are connected and Defined Target Systems.

 

Does anyone have any suggestions on how to resolve the issue of not seeing any BW-BPS planning profiles when I press F4 in the “Planning Profile” field?

 

Thanks!

 

Integrate BPS into CRM planning.jpg

Usage of CRM_ORDER_INDEX

$
0
0

Hi all,

 

I am looking out for some examples where exactly we can use the CRM_ORDER_INDEX table.

 

Can somebody give me a scenario where this table must be used?

 

Thank you.

 


-Ezhno.

BADI CRM_BP_UIU_DEFAULTS or Component Enhancement?

$
0
0

Hello Experts,

 

I just came across BADI CRM_BP_UIU_DEFAULTS implementation.

 

While creating the account, to populate the fields in BP_ADDRESS with default values, this BADI can be used to implement that functionality.

This was the suggestion by our functional consultant.

 

I was thinking, why not to enhance the component and set the default values in DO_PREPARE_OUTPUT method or using some other methods.

I'm sorry for asking so stupid question. But, it's been a question I was asked a few times. I thought it was becoz of performance issue. But, still I'm not sure.

 

Can someone please help me find out the reason why to go for BADI and not to enhance the component?

 

Thanks in advance.

 

-Ezhno.

Planning services & RFC Error in CRM_UI

$
0
0

Dear Folks,

 

Could you pls help on the below errors I am getting while using CRM_UI & choosing the planning profile that has been created in BW.

 

I had defined in the layout that Business partner will be in header area & created a 'Z' variable for the same with the rplacement type as Characteristic value & User specific values & also the indicator 'Input allowed by the user'. Also I have added the user with which the crm_ui will be accessed.

 

After doing all these also, I am getting the below 3 errors.

 

1) Planning Services Error.

2) RFC Error: Characteristics in the header area must be restricted to single values

3) RFC Error: Characteristic 'Business partner' has no single value as a selection

 

So, instead of using the Z variable, thot of using the standard variable BPARTN01 & in BW itself i,e in BPS0 tcode, I am getting the below error

 

4) Value of variable UEX:Business Partner ( BPARTN01 ) cannot be determined

How can I edit this standard variable if i have to.

 

 

Thanks.

Inbound Queue blocked - SAP TM

$
0
0

Hi guys,

 

We are facing an issue regarding CIF. Seems like Inbound Queue in TM got blocked, original error was because number ranges for locations (what I think we already solved) but since queue is blocked we can not send fresh data.

 

I've tried checking SMQ2 from TM side, and SMQ1 from ECC side, both are empty. Any idea how to unlock queue even if no records are displayed in SMQ1 (ECC) / SMQ2 (TM).

 

Many thanks in advance!

Martin,

changing text in class cl_crm_bt_t_searchview_impl

$
0
0

Hi gurus, I am trying to change the text-001 and text-002 in method EH_ONSEARCH at CL_CRM_BT_T_SEARCHVIEW_IMPL.

 

I've amplied the component, but I could do it, because, Do you know any nice way to change these texts ..

 

Thanks in advance.

 

Regards


Account Identification screen behaviour anomaly

$
0
0

Hi CRMers,

 

Please help. I have a puzzle on the identify account screen maybe someone can explain this 'strange' behaviour.

 

Two users - same profile on identify account - person - create - running in debug. (same profile, same role) - CRM7 EHP2

 

  • On one machine with IE 11 -  Communication data does not filter through from the screen - same behaviour with both users
  • On a second machine IE 9 - Communication data does filter through - same for both users
  • On a third machine IE11 - Tested with one user - communication data does filter through (so this negates browser version as the problem).

 

What can I check to see why I get this difference. I have also found that from machine one and machine three if I press F2 on one fo the comms fields the context id is different - could this be the problem - should they be the same and where does one go to check/change this.

 

 

Thanking you in advance..

Leah

BUP004 not added to an Organisational Unit

$
0
0

Hello there,

 

I have an Organizational Structure which was created long time ago and it is linked to a business partner. My issue is that I can't add the BUP004 role to the BP (it doesn't have any role as you can see in the attached image).

 

A few observations:

 

1) Any new other Units created via ppoma_crm for example, has a business partner associated and BUP004 role added automatically added(so it works for any new units).

 

2) Creating a new unit is not an option at all, as I have a lot of information build on my current org. unit business partner.

 

I have tried the following solutions without any success:

 

1)

==> Use Tcode SE37

==> Use functional module as 'HR_OBJECTBUPA_INSERT'  and Execute

==> Click on the value button  and enter OT as 'O',  OBJID as ID of the org BUPAGUID as       

        Businesspartner GUID and Execute


2) Using in se37, bupa_role_add_2 function. After second run, it gives the "BUP004 already added to XXX BP", but in BUT100 table there is no record for that BP, and also, in /bp tcode, the business partner doesn't have the new role associated,

SAP CRM: When create and save opportunity stays editable

$
0
0

Hi experts,

 

I createda copy of thestandardopportunityto createa personalizedopportunityto be calledfrom aroleZ.This new opportunityis called from acopy of standard roleIC_AGENT (ZIC_AGENT).

 

When we createthe opportunity and save the opportunityremainseditable and not locked. If we execute the creation of the opportunity from a Z role copy of sales standard role works fine.

 

We have seen that when the eventSAVE (EH_ONSAVE) runs and execute the method save inside the class cl_crm_uiu_bt_tools at line 49 execute the following code:

 

** document is not a service confirmation
    lr_access = cl_crm_uiu_bt_channel_asp_fac=>get_instance( ).
    lv_edit_after_save = lr_access->if_crm_uiu_channel_aspects~keep_edit_mode_after_save( ).

 

 

This code causes the opportunity is not locked and remaining editable. What means the message "document is not a service confirmation"?

 

 

Can anybody help us?

 

 

Thanks and kind regards,

David

IPC Server not registered with Dispatcher

$
0
0

Hi,

I have set up CCMS monitoring for IPC 4.0 SP10. I am getting the following:

 

Hearbeat : 0 sec

Availability : 0%

Status : IPC not registered at Dispatcher and somes services are not running

 

On checking the IPC Dispatcher, I find the below content:

 

Sep 27, 2007 3:29:22 PM  ....socket.server.dispatcher.RegisterMgr [main] Info: Retrieved gateway settings from SAP Basis System SRMSERVER:sapgw00,SRMSERVER:sapgw00

Sep 27, 2007 3:29:22 PM  ....socket.server.dispatcher.RegisterMgr [main] Info: Dispatcher settings:

        Try 1000 ms to ping an IPC server.

        Don't contact IPC servers the next 20000 ms after a ping.

        Use normal load balancing without any specialized servers.

        Specialized servers are  generalized to replace dead ones.

        Load one leaves a server alone for 45000 msec.

        RFC support is enabled.

                (dispatcher:IPC_RFC_DISPATCHER, servers:IPC_RFC_SERVER_1

                 gateways:SRMSERVER:sapgw00,SRMSERVER:sapgw00)        Don't send mail about servers that are down.

 

Sep 27, 2007 3:29:22 PM      com.sap.sxe.socket.server.ServerBase [main] Info: IPC Security-Level: 0

Sep 27, 2007 3:29:22 PM      com.sap.sxe.socket.server.JavaServer [main] Fatal:

Fatal error during dispatcher startup!

Could not listen on port 4444. Another application,

probably another dispatcher or server, is using this port already.

Please check your service settings or change the IPC port using. the IPC Administrator

 

Also, in the IPC Server, I have the following:

 

Sep 27, 2007 3:31:34 PM              com.sap.sxe.log.ExceptionLog [Main TCP/IP L

oop] Error: Exception   in client exception, : During configuration or pricing in context sxe.socket.server.dispatcher.RegisterMgr.register(RegisterMgr.java:382, internal error java.lang.IllegalStateException: No free RFC destination found in RFC mode. Server 155.66.46.154:9998 not registered occurred

com.sap.sxe.socket.client.ClientException: During configuration or pricing in co

, internal error java.lang.IllegalStateException: No free RFC destination found

in RFC mode. Server 155.66.46.154:9998 not registered occurred

        at com.sap.sxe.socket.client.Client.doReadWrite(Client.java:725)

        at com.sap.sxe.socket.client.Client.readWrite(Client.java:601)

        at com.sap.sxe.socket.client.Client.communicate(Client.java:766)

        at com.sap.sxe.socket.client.ClientSupport.cmd(ClientSupport.java:176)

        at com.sap.sxe.socket.client.ClientSupport.cmd(ClientSupport.java:142)

        at com.sap.sxe.socket.server.JavaServer._doRegister(JavaServer.java:323)

        at com.sap.sxe.socket.server.JavaServer._register(JavaServer.java:269)

        at com.sap.sxe.socket.server.JavaServer.run(JavaServer.java:201)

Sep 27, 2007 3:31:34 PM          com.sap.sxe.socket.client.Client [Main TCP/IP Loop] Debug: Client closed:

Sep 27, 2007 3:31:34 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP Loop] Fatal: Couldn't register at the dispatcher at localhost:4444. Server terminates

Server terminates...

 

Both the IPC Dispatcher and Server services are running properly.

I am getting the Session ID when I run the Function Module COM_IPC_SESSION_BEGIN in transaction SE37.

My SAPCCMSR agent is also running fine.

 

Request you to provide me a solution for the same as early as possible.

 

Thanks and Regards,

Sasi

Dynamic navigation from ZCOMP1 to ZCOMP2

$
0
0

Hi experts,

 

Hope you are all doing good!

 

This is the first time I'm working with the dynamic navigation. So, I'm just trying to understand how really it works with two custom components.

I've already searched this forum n got some info. But, I'm getting confused with the procedure. 

 

While calling the target component, I see the below code:

 

lr_window ?= me->view_manager->get_window_controller( ).

lr_window->call_outbound_plug( iv_outbound_plug = 'TOCOMP2' iv_data_collection = lr_data_collection ).

 

and in another thread, they used:

 

lr_navigation = cl_crm_ui_navigation_service=>get_instance( ).

CHECK lr_navigation IS BOUND.

lr_navigation->navigate_dynamically( lr_col ).

 

Can someone help with the difference between these methods?  I really need this to understand clearly before proceeding further.

I would really appreciate if someone can provide the generic procedure to achieve this. Thank you a lot.

 

 

-Ezhno.

Condition Determination in Quotation

$
0
0

Dear all,

 

In quotation transaction pricing condition types is not determining automatically.

 

Downloaded condition objects from ECC - 'DNL_CUST_CNDALL, DNL_CUST_CND, DNL_CUST_PRC'.

 

I have add user parameter PRC_TRAC and check SLG1 downloaded conditions.

 

Ensured all Condtion Tables, Condition Types and Pricing Procedures downloaded in to CRM system (BP C03.3.1.5.3.3)

 

I have re-downloaded objects DNL_CUST_CNDALL, DNL_CUST_PRC and DNL_CUST_CND, but there is no improvement.

 

I could not trace the problem from where it is coming, Kindly help me in resolving the issue.

 

Best regards,

 

Amulet

XML parsing error in Webservices

$
0
0

Hi All,

 

We have a web services to get service order details. It shows

 

the following error sometimes on the browser.

 

"XMLParser : #0 not allowed in Character data sections (:main:, row:1, col:0)"

 

This particular error occurs only in quality system not in development. We found that this particular error is due to some special characters present in the service order notes(intergal/general). But same content doesn't reproduce the error in development system web services.

 

I tried to find the place where exactly this error is populated to webservices. But i couldn't able to acheive it.

 

But in transformation serializations the xml is getting filled. As of ma understanding there is no problem in serializations. Can anyone please tell the exact xml verification method/routine where this error might be thrown?.

 

And the special character is passed as ' #'(space#) in export parameter(table) of web services function module. But we get the error as #0 not allowed .

 

Your help is very much appreciated.

 

1200.png

 

Thanks,

Karthik


This content cannot be displayed in a frame

$
0
0


Hi,

We are using a direct link (created from Transaction Launcher) to load an internal website in the organization. On clicking the link, it shows a window with the error 'This content cannot be displayed in a frame'. We have checked if the website can be loaded in a frame using a tool provided in one of the discussions and it shows that the page can not be displayed. Opening the link in a normal browser window rather than in a frame seems to resolve the issue.

 

The customer wants the link to be available in the Navigation bar and do not want it be provided as a link on the work area. So, we are looking for ways (both configuration and code changes) to achieve the loading of the page.

 

Appreciate your help,

~Athreya

Messages in Search help Pop Up

$
0
0

Hello Experts,

 

I have created a Elementary search help in Data dictionary and have used for Web UI Fields.

 

Now the search criteria is appearing as mentioned in elementary search help. I want to throw a error message if the user clicks on search without entering search criteria.

 

i tried to add message in global message container, but the message is not displaying on the popup, message gets added to Global message container but will be shown once the pop up closes. I need to show the error message on Search help pop up screen only.

 

Please suggest how to make these fields mandatory on search help.

 

BR,

Nikhil Kulkarni

Where to find text in Notes area generated automatically?

$
0
0

Hi Colleagues,

 

The following screen shot is about ZS14 Activity, when creating this activity, text in Notes area is generated automatically. I can find text stored in one template called 'ZZS_ZS14_TEMPLATE' via t-code SO10, and can read this template using funtion module 'READ_TEXT', but where to find this part of coding to generate this text?

screenshot.png

 

Kind Regards

Andie

Daefault Usage in the POPUP while creating new Segemntation Model in UI..

$
0
0

Hi,

 

How can we default the Usage in the Create Model popup that comes when we click on create new segemntation Model in UI .

Capture1.PNG

 

Thanks

Kumar

Table SMW3_BDOC2 not reorganized

$
0
0

Hi,

 

When I do BDoc reorganization in system, I found only records in table SMW3_BDOC were deleted. But there are still many entries in table SMW3_BDOC2. How to reorganize those obsolete entries in that table?

 

Thanks!

Viewing all 4552 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>